Ratoc Systems USB-Serial Converter REX-USB60F Bedienungsanleitung PDF herunterladen (Seite 105)

5-39

Functions

5. Functions

(2) When initializing with the TOP software on the PC

All parameters can be reset to their default values (default values in the robot driver)

by using the tool bar or the pull-down menu on the TOP software screen.

Start up the TOP software to make connection with the robot driver.

1. Click

on the toolbar on the parameter setup screen.

(You can also use the pull-down menu.)

2. The "Initialization setup" screen then appears as shown below. In the "Initialization

mode" drop-down list select the item you want to initialize.

The following items can be selected in the "Initialization mode" drop-down list.

Trip history clear: Clears only the tripped alarm log.

Data initialization: Clears only the parameter data.

3. Click the [Initialization start] button. Initializing then begins.

During initializing, the LED indicator on the robot driver shows:

"HC"

→

during alarm log clear

"JP"

→

during data initialization

Note: Do not shut down the control power for the robot driver during

initialization.

Shutting off the power while data is being written may destroy the EEPROM

data (stored data) within the robot driver, and the robot driver may fail to

operate correctly.

4. After initializing, the data is automatically loaded into the PC from the robot driver,

and the initializing then ends.

5. After initializing the parameter data, perform generation.

Note: After initializing the parameters, you must perform generation before

operating the robot.

If the robot is operated in the initialized state, it might malfunction or be

damaged.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 249 250

Keine Kommentare

Ratoc Systems USB-Serial Converter REX-USB60F Bedienungsanleitung Seite 105