Ratoc Systems SMA03U Betriebsanweisung

USB Port SmartMediaReader/WriterSMA03UUser GuideMay 1999Rev. 1.1

102-3. How to register1.On the Internet,access our site.(http:www.rexpccard.co.jp)2.Follow window menu guide to register3.Fill out and submit the regi

11NOTE:-Please include the following information to help us to assist you in the event of a problem: -Model type, serial number and product descripti

12 For Windows98

133.SetupHere is how to get started SMA03U:1.Connect the SMA03U to the PC.2.Installation of the driver for Windows98.3-1. Connect the SMA03U to the PC

14When you insert USB cable to the PC for the first time,Add New Hardware Wizard screen will appear.In such a case,refer to 3-2.Installation of the dr

153-2. Installation of the driver for Windows98Here is an explanation of how to install the driver for Windows98.1. You will see a screen below.Click

162. When the following window appears,select Search for the best driver for yourdevice(Recommended). Then click Next button.

173.When the following window appears,check the Floppy disk drives box.Then insert the setup floppy disk into the floppy disk drive and click on t

184.When the following window appears,click on the Next button.

195.When the following window appears,click on the Finsish button.

SMA03U User Guide1-1. Features ...21-2

206.When the following window appears,click on the Next button.

217.When the following window appears,select Search for the best driver for your device(Recommended).Then click Next button.

228.When the following window appears,check the Floppy disk drives box.Then insert the support software floppy disk into the floppy disk drive and

239.When the following window appears,and click on the Next button.

2410.When the following window appears,and click on the Finish button.

2511.Now you finish installing the driver of SMA03U for Windows98. In the My Computer,check there is Removable Disk icon. Take a screen below fo

26When Windows98 urges you to insert Windows98 CD-ROMduring installation. 1.When such a screen appears,just click OK button. 2.Insert the flop

274.Using SMA03U4-1. Power Supply LED and Access LEDPower Supply LEDWhile the PC is on, SMA03U is supplied power and Power Supply LED turnsgreen.If th

284-2. Removal of SMA03UBefore removing SMA03U,check Access LED is not ON.After checking this point,pull the USB cable out of USB port of the PC.You c

294-3. Inserting the SmartMedia1.Insert the SmartMedia into the slot as shown in the illustration.3.3V SmartMedia 5V SmartMedia

3-1. Connect the SMA03U to the PC ... 103-2. Installation of the driver for Win

302.Push the SmartMedia until it is firmly seated.

314-4. Removing the SmartMedia CautionsDo not remove the SMA03U or SmartMedia while the Access LED is on. If you ignore this cautions,the

322.Pull the SmartMedia out of the slot as shown below.

335.Handling files in SmartMedia5-1. Read/Write files in SmartMediaIf you insert SmartMedia into the slot of SMA03U, Removable Disk will ap-pear in th

345-2. About Write-Protect of SmartMediaTo prevent unintended writing date to,erasing data from,formatting ofSmartMedia,stick a Write-Protect label on

356.TroubleshootingProblem Cause Solution Page-Power Supply LED

36Problem Cause Solution Page-You can’t see You failed to install Install the driv

377.Set USB Port EnableWhen you use SMA03U,you have to set USB port enable.Make sure that USB port is set enable ,following the instructions below.1.C

383.Click on the Device Manager tab.4.You will see a screen below and check there is no [!] or [ × ] mark in theUniversal serial bus controller.

39If there is [!] or [×] mark in the Universal serial bus controller, double-clickthe item and follow the next instructions.5.You will see a screen b

4FCC StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. Th

406.Make sure that Disable in this hardware profile is not ckecked anymoreand click OK button.

417.You will see a screen below. Click Enable Device button on the General tagscreen. In this case,there is a [!] or [×] mark on USB Root Hub.

428.Make sure that Disable in this hardware profile is not ckecked anymoreand click OK button.

438.Set SMA03U Enable1.Click Start button and select [Control Panel] in the [Settings] menu.2. Double-click the [System] icon.

443.Click on the Device Manager tab.

454.You will see a screen below and check there is no [!] or [ × ] marks onSMA03U as shown below.

46If there is [!] or [×] mark on SMA03U, double-click the REX-Sma03 SmartMedia Adapter and follow the next instructions.

475.You will see a screen below. Click Enable Device button on the General tagscreen. In this case,there is a [!] or [×] mark on REX-Sma03 SmartMedi

486.Make sure that Disable in this hardware profile is not ckecked anymoreand click OK button.

49 For Macintosh

51.IntroductionThank you for purchasing the SMA03U kit. This kit contains the SMA03 USBSmartMedia Reader/Writer, software for Windows 98, software for

509.Setup for MacintoshBefore you setup SMA03U,make sure that there is File Exchange in ControlPanels.Here is how to get started with SMA03U:1.Install

519-1. Installation of the driver for Macintosh1.Start your Mac and insert Setup CD-ROM for Macintosh into CD-ROM drive. Finish all the other applic

524.You will see a screen below.Make sure Easy Install is selected and click [Install].

535.You will see a screen below. Click [Restart].

549-2. Connect the SMA03U to the Mac1.After restarting your Mac,connect USB cable of SMA03U to the Mac.2.Now you can use SMA03U.-It is necessary for U

5510.Using SMA03U10-1. Power Supply LED and Access LEDPower Supply LEDWhile the Mac is on, SMA03U is supplied power and Power Supply LEDturns green.I

5610-2. Removal of SMA03UBefore removing SMA03U,check Access LED is not ON and Trash SmartMedia.After checking these points,pull the USB cable out of

5710-3. Inserting the SmartMedia1.Insert the SmartMedia into the slot as shown in the illustration.3.3V SmartMedia 5V SmartMedia

582.Push the SmartMedia until it is firmly seated.3. The icon below will be mounted. It will take longer time to recognize larger SmartMedia like 3

5910-4. Removing the SmartMedia CautionsDo not remove the SMA03U or SmartMedia while the Access LED is on. If you ignore this cautions

61-2. About the SMA03U User Guide-Information in this document is subject to change without notice.-If you have any questions or find errors in this g

603. Pull the SmartMedia out of the slot as shown below.

6111.Handling SmartMedia11-1. About Write-Protect of SmartMediaTo prevent unintended writing date to,erasing data from,formatting ofSmartMedia,stick a

621.Select the mounted icon below.2.Select Erase Disk of the Special pull down menu on the task bar.3.When you click Erase button,formatting SmartMedi

63Problem Cause Solution Page-Power Supply LED You don’t connect

64Problem Cause Solution Page-Dialog box saying We are investig

6513.SpecificationsProduct name SMA03UModel name USB SmartMedia Reader/WriterInterface USB(Universal Serial Bus)Size 77mm(W)

71-4. The name of the parts of SMA03 USB Connector

81-5. System requirements-USB port-Windows 98, MacOS8.5.1 or later1-6. SmartMedia compatibilitySupports both 3.3V and 5V SmartMedia (up to 128Mb)-5V

92.Before using SMA03U2-1. Cautions-Do not bend,drop or strike the adapter and cable,or put them under heavy pressure.-Never attempt to disassemble th